KGLM SL - Metric sizes, Slim Line - igus

CAD model selection

	1
	2
	3
	4

		LINA Bill of material	ARTNR Part no. ⁿ/ₐ	SKR Max. static compressive strength (short term) radial [N]	SKA Max. static compressive strength (short term) axial [N]	SLR Max. static compressive strength (long term) radial [N]	SLA Max. static compressive strength (long term) axial [N]	D1 Diameter E10 [mm]	D2 Diameter [mm]	B Width [mm]	F Width [mm]	SW1 Max. pivot angle [°]

		KGLM-08 SL	KGLM-08 SL	2700	450	1350	225	8	14	9.0	0.5	5
		KGLM-10 SL	KGLM-10 SL	4000	750	2000	375	10	16	10.5	0.5	5
		KGLM-12 SL	KGLM-12 SL	4500	750	2250	375	12	18	12.0	0.5	5
		KGLM-16 SL	KGLM-16 SL	6500	500	3250	250	16	22	15.0	0.5	5

Additional Information

Users who viewed this, were also interested in

QJFM - Flange pillow block

QJFM - Flange pillow blockigus 20.07.2021

iglidur® G - type S - metric sizes

iglidur® G - type S - metric sizesigus 08.11.2023

iglidur® G - type F - metric sizes

iglidur® G - type F - metric sizesigus 19.01.2021

SLS - Lead screw support blocks

SLS - Lead screw support blocksigus 13.09.2022

GERMFE - Metric sizes, right-hand thread, with Spring-Loaded-Pins, used in combination with series E rod end bearings

GERMFE - Metric sizes, right-hand thread, with Spring-Loaded-Pins, used in ...igus 19.01.2021

DryLin® SAW - Linear axis

DryLin® SAW - Linear axisigus 12.09.2022

WAS - Shaft End Block, Narrow Design, mm

WAS - Shaft End Block, Narrow Design, mmigus 12.09.2022

TAF - Shaft End Support, fixed, mm

TAF - Shaft End Support, fixed, mmigus 12.09.2022

Single rail - Square

Single rail - Squareigus 09.09.2022

FJUMT-02 - Tandem Flange, square, mm

FJUMT-02 - Tandem Flange, square, mmigus 12.09.2022

N 27 - Low-Profile Linear Guideigus 08.09.2022

JSRM - Zero backlash lead screw nuts

JSRM - Zero backlash lead screw nutsigus 13.09.2022

KBLM - Metric sizes, left-hand thread

KBLM - Metric sizes, left-hand threadigus 19.01.2021

EBLI - Inch sizes, left-hand thread

EBLI - Inch sizes, left-hand threadigus 20.07.2021