CENCON_B - Centering unit - RCM

CAD model selection

	1
	2
	3
	4
	5

		LINA Bill of material	IDNR Ident number ⁿ/ₐ	TYP ⁿ/ₐ	D1 [mm]	L2 [mm]	L1 [mm]	L [mm]	H [mm]	D ⁿ/ₐ	T [mm]	ESECUZIONE ⁿ/ₐ	MATERIALE Material ⁿ/ₐ	DUREZZA Hardness ⁿ/ₐ	D2 [mm]	D3 [mm]	D4 [mm]	D5 [mm]	L3 [mm]	L4 [mm]	L5 [mm]	L6 [mm]

		CENCON16		CENCON	16	12	8	50	24	M6	13	Carburized, hardened, gri...	UNI 16 Ni Cr 4	HRC 60-62	11.000	8.300	7.800	11.000	2.000	2.000	2.000	8.000
		CENCON20		CENCON	20	16	10	64	31	M8	20	Carburized, hardened, gri...	UNI 16 Ni Cr 4	HRC 60-62	15.000	10.300	9.840	14.000	2.000	2.000	4.000	10.000
		CENCON25		CENCON	25	17	12	64	31	M8	20	Carburized, hardened, gri...	UNI 16 Ni Cr 4	HRC 60-62	15.000	10.300	10.300	18.000	2.000	2.000	3.000	12.000
		CENCON32		CENCON	32	23	15	80	39	M10	24	Carburized, hardened, gri...	UNI 16 Ni Cr 4	HRC 60-62	17.000	13.300	12.500	24.000	2.900	1.100	6.000	15.000
		CENCON40		CENCON	40	26	20	100	49	M10	24	Carburized, hardened, gri...	UNI 16 Ni Cr 4	HRC 60-62	17.000	13.300	12.750	30.000	2.900	1.100	6.000	20.000

Additional Information

Users who viewed this, were also interested in