1265 - Safety ring - Kern

CAD model selection

	1
	2
	3
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18

		ISO 1265 - 10	20.2	13x1	10
		ISO 1265 - 11	21.4	14x1	11
		ISO 1265 - 12	22.6	15x1	12
		ISO 1265 - 15	28.4	20x1.2	15
		ISO 1265 - 16	29.6	21x1.2	16
		ISO 1265 - 19	33.2	24x1.2	19
		ISO 1265 - 20	34.2	25x1.2	20
		ISO 1265 - 24	39.1	29x1.5	24
		ISO 1265 - 25	40.5	30x1.5	25
		ISO 1265 - 30	49.0	37x1.75	30
		ISO 1265 - 32	51.4	39x1.75	32
		ISO 1265 - 38	59.1	45x1.75	38
		ISO 1265 - 40	60.8	47x1.75	40
		ISO 1265 - 48	70.2	55x2	48
		ISO 1265 - 50	72.6	57x2	50
		ISO 1265 - 60	83.1	67x2.5	60
		ISO 1265 - 63	87.0	70x2.5	63
		ISO 1265 - 80	108.5	90x3	80

Additional Information

Users who viewed this, were also interested in

DIN 471 - Retaining rings for shafts

DIN 471 - Retaining rings for shaftsFabory 13.02.2023

1265 - Safety ring DIN 471

1265 - Safety ring DIN 471Veith 13.03.2012

DIN ≈471 - Retaining rings for shafts

DIN ≈471 - Retaining rings for shaftsFabory 13.02.2023

1281.4 - Plain wearstripes

1281.4 - Plain wearstripesKern 26.02.2019

SN1791 - External circlip (DIN 471)

SN1791 - External circlip (DIN 471)STRACK 02.11.2023

1268.2 - Clamp washer

1268.2 - Clamp washerKern 26.02.2019

1269 ISO - Clamps with screw

1269 ISO - Clamps with screwKern 26.02.2019

3440 - Ground shoulder screws

3440 - Ground shoulder screwsKern 26.02.2019

1259 ISO - Ball cages

1259 ISO - Ball cagesKern 26.02.2019

1268 ISO - Clamp washer with screw

1268 ISO - Clamp washer with screwKern 26.02.2019

1251.2 ISO - Ball bearing guide bushes with shoulder

1251.2 ISO - Ball bearing guide bushes with shoulderKern 26.02.2019

206.72. - Circlip DIN 471

206.72. - Circlip DIN 471FIBRO 21.07.2023

1270 - Demountable guide bushes with shoulder, bronze with solid lubricant

1270 - Demountable guide bushes with shoulder, bronze with solid lubricantKern 26.02.2019

DIN 472 - Retaining rings for bores

DIN 472 - Retaining rings for boresFabory 13.02.2023